|
| |
We are very proud to announce we are a
factory authorized distributor in Washington &
Hawaii for Stellar Industries.
Call us today for information on a Stellar Container Carrier.
We can service your hoist
and offer parts as well.
|
The stellar Container
with optional Rotator |
The Stellar Industries Container Carriers can
meet all your container delivery, switching and now dumping needs
available with the optional 360° rotator attachment.
The Stellar Container carrier boasts an 8,000-pound lifting, dumping
and transporting capacity. The ECCR model features extendable forks
for easy pick-up and placement of containers, continuous rotation
for dumping from either side, and has the ability to distribute
significantly more weight to the front axle than competitive models.
Stellar Container Carrier features include improved visibility of
rear lights, less cylinders and seal kits to maintain, and an
overall heavy-duty construction and the ability to move front-load
and rear-load containers. |
 |
| Equipped with the hydraulic 360 degree
continuous rotator, the container carrier can dump
front-load containers with no limit to the direction or extent of
the dump angle. |
Model ECCR:
Extendable and retractable fork body with rotator
Model CCR: Non-extending with rotator
Model CC: Non-extending, non-rotating |
| Specifications: ECCR |
Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight
|
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
Worm/turntable gear bearings
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
4-spool cable controlled
26,000 lbs (11.8 mt)
3,102 lbs (1,407 kg) |
|
Specifications:
CCR |
Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight
|
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
Worm/turntable gear bearings
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
3-spool cable controlled
26,000 lbs (11.8 mt)
3,000 lbs (1,361 kg) |
|
Specifications:
CC |
Lifting capacity
Dumping capacity
Transporting capacity*
Container sizes
Type of containers
Rotation
Stacking capability
Operating pressure
GPM
Hydraulic tank
Recommended CA
Controls
Bushings and grease zerks
Container bumpers
Hydraulic pump
Valve bank
Min. chassis
Shipping weight |
8,000 lbs (3,629 kg)
-
8,000 lbs (3,629 kg)
2-10 yd
Front and rear load containers
-
2-8 yd
4,500 psi (31 mpa)
12 (45 lpm)
10-gallon (38 ltr)
84" to 114" (2,134 to 2,896 mm)
Inside & outside controls
At all pivot and rotation points
Molded rubber
Bent axis piston type
2-spool cable controlled
26,000 lbs (11.8 mt)
2,084 lbs (945 kg) |
 |
From the top of the frame rail to the
bottom of the fork is 78.34" (199 cm).
The center of gravity of the ECCR unit is located approximately 17"
in front of the rear axle. In the stored position, the center of
gravity of the container is located approximately 43" behind rear
axle. |
| * Truck chassis manufacturer's
specific body and equipment weight and center of gravity limitation
must not be exceeded. Stellar® Container Carrier installation will
require calculation of CG for compliance with Federal Motor Vehicle
Safety Standards. |
Call us today for a quote!
|
Download our
Line Card below
(PDF)
 |
Download
the Container Carrier Flyer below
(PDF)
|
The above file download requires Adobe Acrobat reader.
Click here to get Adobe
Reader
|
Western Cascade
Container LLC
